Product Overview

Manufactured in Hutchinson, MN

Every stamp. Every die. One cabinet.

The Stamp & Die Storage Cabinet turns your whole collection into a filing system you can flip through. Each drawer is built around Storage Pockets and Magnet Cards, with slide-in dividers that hold your sets upright in neat rows — pull a drawer, find the set, close it, and get back to making. Choose Counter or Bar height, and add legs or set it right on the floor.

Designed for:

6x7 Storage Pockets 9.5x7 Storage Pockets Magnet Cards Stamp Cards …and 5⅝" × 9" Stamp & Die Organizers by Stampin' Up!® (vertically straight up in Counter height, at a slight angle in Bar height)

Divided Drawers

Three rows. Two rows. Or one long one.

Every drawer ships with dividers, and every drawer has multiple slots to drop them into. Set the dividers one way for three rows of 6x7 Storage Pockets and Magnet Cards, another way for two rows of 9.5x7, turn your 9.5x7 pockets sideways for one full row that squeezes in the most sets, or run four rows of Stampin' Up!® Stamp & Die Organizers. You can even mix layouts drawer by drawer as your collection changes.

BCO Stamp & Die Storage Cabinet with a drawer open, showing Storage Pockets and Magnet Cards filed upright in rows between dividers

1 Three rows — dividers set for 6x7 Storage Pockets and Magnet Cards.

2 Two rows — dividers set for 9.5x7 Storage Pockets and Magnet Cards.

3 One full row — 9.5x7 pockets turned sideways to maximize storage.

4 Four rows — Stampin' Up!® Stamp & Die Organizers, 40 per row. Vertically straight up in Counter height; at a slight angle in Bar height.

Choose Your Height

Three drawers or four.

Both heights are Double width and share the same footprint as our Double Storage Cabinets. The height you pick sets the drawer count — and decides whether Stampin' Up!® organizers stand straight up or lean.

Counter Height

3 divided drawers

Best for

Sitting beside Counter height Storage Cabinets or a Counter height desk
Stampin' Up!® 5⅝" × 9" Stamp & Die Organizers — they stand vertically straight up in these drawers
Up to 360 sets of 6x7, 240 sets of 9.5x7, or 480 Stampin' Up!® organizers

Bar Height

4 divided drawers

Best for

Sitting beside Bar height Storage Cabinets or a Craft Island
The biggest collections — one more drawer than Counter height
Up to 480 sets of 6x7, 320 sets of 9.5x7, or 640 Stampin' Up!® organizers (they sit at a slight angle in these drawers)

Use Stampin' Up!® Stamp & Die Organizers? They stand vertically straight up in the Counter height drawers. They'll go in the Bar height drawers too, but they'll sit at a slight angle — worth knowing before you choose.

Choose Your Base

Raise it, or leave it.

Add legs for a lifted, furniture-style look, or set the cabinet directly on the floor. Match the base to whatever your neighboring BCO cabinets are using so the worksurfaces line up flush.

With Legs

Lifted, furniture-style look

Best for

Sitting beside Storage Cabinets that already have legs
A furniture-like look in a room that doubles as living space
Easy cleaning underneath without moving the cabinet

No Legs

Sits directly on the floor

Best for

Sitting beside Storage Cabinets without legs
The lowest finished height of the two options
A permanent spot against a wall or in a corner

Legs add 2½" to the height. If the Stamp & Die Storage Cabinet is going beside your existing BCO furniture, choose the same base option those cabinets use so the worksurfaces finish at the same height.

How much fits

Do the math on your collection.

Each drawer holds up to 120 6x7 Stamp & Die sets or up to 80 9.5x7 sets — stored on Magnet Cards, tucked in Storage Pockets, and filed upright so every label reads at a glance. Store Stampin' Up!® organizers instead and each drawer takes 160 of them: four rows of 40, vertically straight up in Counter height or at a slight angle in Bar height.

A Stamp & Die Storage Cabinet drawer filled with labeled Storage Pockets filed in three rows

Stamp & die math

Each drawer holds up to 120 sets of 6x7, 80 sets of 9.5x7, or 160 Stampin' Up!® organizers.

Fill every drawer with one size, and here's what each cabinet holds:

Counter · 3 drawers

3606x7 sets

Counter · 3 drawers

2409.5x7 sets

Counter · 3 drawers

480SU!® organizers · upright

Bar · 4 drawers

4806x7 sets

Bar · 4 drawers

3209.5x7 sets

Bar · 4 drawers

640SU!® organizers · angled

A Complete System

Three pieces that work as one.

The cabinet is the home. Storage Pockets, Magnet Cards, and Crate Dividers are what turn it into a system you can flip through, label, and grow — one set at a time.

Magnet Cards

6x7 · 9.5x7 Slimline

Dies stick to the magnetic front; clear and cling stamps adhere to the coated back — so a matching stamp and die set lives on one card.

Storage Pockets

6x7 · 9.5x7 landscape only

Slide a Magnet Card inside and label the tab. The pocket is what stands upright in the drawer, so every set is visible and easy to pull. For 9.5x7, choose the landscape pocket — the portrait version is too tall to file in these drawers.

Crate Dividers

Tabbed, laminated

Drop them between pockets within a row to sort by brand, theme, or occasion — the same dividers you'd use in an Acrylic Crate.

Included with every cabinet

Dividers in every drawer.

Each drawer ships with its own set of slide-in dividers. They're what hold your Storage Pockets upright and let you switch a drawer between three rows of 6x7 and two rows of 9.5x7 — no tools, no extra purchase.

Drawer Dividers

Slide into any of the slots along the drawer to set your row layout. Move them anytime as your mix of 6x7 and 9.5x7 sets changes.

This cabinet must be anchored to the wall. A drawer full of Magnet Cards is heavy, and an open drawer shifts the cabinet's weight forward — anchoring keeps it stable and safe. Plan its permanent spot before assembly.

Coordinates with the BCO furniture system.

The outside dimensions match a Double Counter or Double Bar height Storage Cabinet, so it sits in line with a run of cabinets and carries the worksurface across as one continuous countertop. Choose the same height and base option as its neighbors and everything lines up flush.

Built like real craft furniture.

Same construction quality as our Storage Cabinets — high-quality worksurface and 3/4" thermofused melamine cabinet body, with drawers sized to carry the weight of a full Magnet Card collection.

Width Double

Height options Counter or Bar

Base options Legs or none

Drawers 3 (Counter) · 4 (Bar)

Included with each drawer Slide-in dividers

Per drawer, up to 120 sets of 6x7 · 80 sets of 9.5x7 · 160 SU!® organizers

Installation Wall anchoring required

Color White

Made in Hutchinson, MN

Dimensions

Will it fit your space?

The outside dimensions are identical to a Double Counter or Double Bar height Storage Cabinet — 27¾" wide and 14⅜" deep. Counter height stands 31¾" and Bar height 39¼"; legs add 2½" to either.

Dimensioned drawing of the BCO Stamp & Die Storage Cabinet in Counter and Bar heights, with and without legs

Configuration

Width

Height

Counter · No Legs

27¾"

31¾"

Counter · With Legs

27¾"

34¼"

Bar · No Legs

27¾"

39¼"

Bar · With Legs

27¾"

41¾"

All configurations: 14⅜" deep · Counter drawers 23⅝" w × 11½" d × 9⅜" h inside · Bar drawers 23⅝" w × 11½" d × 8¾" h inside · Legs add 2½" to the height

Common questions.

Does the Stamp & Die Storage Cabinet require assembly?

Yes, assembly is required. Your cabinet arrives ready to be assembled, and the drawers and dividers are installed as part of your setup.

Before you begin, decide where the cabinet will live — it needs to be anchored to the wall once assembled, so it's easiest to build it in or near its permanent spot. Review the instructions first and set your divider layout before you start loading pockets.

Why does it need to be anchored to the wall?

Magnet Cards are heavier than they look, and a full drawer holds dozens of them. When a loaded drawer is pulled open, that weight moves out in front of the cabinet. Anchoring to the wall keeps the cabinet stable no matter how many drawers are open — it's a requirement, not a suggestion, for this piece.

Can I mix 6x7 and 9.5x7 pockets in the same cabinet?

Yes — each drawer is set up independently. Run one drawer as three rows of 6x7, the next as two rows of 9.5x7 or one long sideways row of 9.5x7, and another as four rows of Stampin' Up!® organizers. The dividers slide out and back in wherever you need them, so you can rearrange a drawer whenever your collection shifts.

Will my Stampin' Up!® Stamp & Die Organizers fit?

Yes. The 5⅝" × 9" Stamp & Die Organizers by Stampin' Up!® stand vertically straight up in the Counter height drawers. They'll also go in the Bar height cabinet, but those drawers hold them at a slight angle rather than straight up. Either way, each drawer holds four rows of 40 — 160 organizers per drawer, 480 in a Counter height cabinet or 640 in Bar height. If most of your collection is in Stampin' Up!® organizers, Counter height is the cleaner fit.

Should I choose Counter or Bar height?

Start with what it's sitting next to. If it's joining a run of Counter height Storage Cabinets or a desk, choose Counter; if it's beside Bar height cabinets or a Craft Island, choose Bar. Standing on its own, Bar height gives you a fourth drawer and the most storage; Counter height is the pick if you store Stampin' Up!® organizers or prefer a lower worksurface.

Do I need Storage Pockets and Magnet Cards, or can I use the drawers as-is?

The drawers and dividers work on their own, but the cabinet is designed as a complete system with Storage Pockets and Magnet Cards. Dies and stamps go on a Magnet Card, the card slides into a labeled Storage Pocket, and the pocket files upright between the dividers. Add Crate Dividers to sort within a row by brand, theme, or occasion. That's how you get the "flip through and find it" experience the cabinet is built for.

How is this different from a Double Storage Cabinet with drawers?

A Storage Cabinet uses shallow modular drawers you configure slot by slot — great for tools, vinyl, and mixed supplies. The Stamp & Die Storage Cabinet has the same footprint, but its drawers are deep enough to file Storage Pockets upright, come with dividers, and are sized specifically to 6x7 and 9.5x7 sets. If stamps and dies are the bulk of what you store, this is the purpose-built option.

Will it match my existing BCO Storage Cabinets?

Yes. The construction and finish match, and the outside dimensions are the same as a Double Counter or Double Bar height Storage Cabinet. For the worksurfaces to line up flush, choose the same height and the same base option (legs or none) as the cabinets it's sitting beside.

Can I use it as a stand-alone piece?

Absolutely. It's a complete stamp and die station on its own — divided drawers below and a full worksurface on top for stamping, die cutting, or a Big Shot. Since it anchors to the wall, pick a spot along a wall rather than the middle of the room. You can always add Storage Cabinets beside it later.

Not sure how it fits your craft room?

Use our free room planner to drop the Stamp & Die Storage Cabinet (and any other BCO furniture) into your space — to scale, before you buy. No account needed.

Plan My Room → Shop Storage Cabinets →

Complete the system.

These are the three pieces the cabinet was designed around — add them and your stamps and dies go from "somewhere in a drawer" to labeled, filed, and found in seconds.